|
Seabotix LBV 150
Small ROV
|
LBV 150S - Specifications
LBV
|
Depth Rating
|
150 Meters Seawater (MSW) - 500 Feet Seawater (FSW)
|
Length
|
530 mm - 21 in
|
Width
|
245 mm - 9.65 in
|
Height
|
254 mm - 10 in
|
Diagonal
|
353 mm - 13.9 in
|
Weight in Air
|
10.4 kg - 22.9 lbs
|
Protection
|
Protective shell and polyethylene bumper frame
|
Thrusters
|
Thruster configuration
|
Four (4) Brushless DC thrusters - Two (2) forward, one (1) vertical and one (1) lateral. Each thruster is identical and isolated
|
Bollard Thrust (forward)
|
5.5 kgf - 12.1 ft/lbs
|
Bollard Thrust (vertical)
|
2.5 kgf - 5.5 ft/lbs
|
Bollard Thrust (lateral)
|
3.2 kgf - 7 ft/lbs
|
Speed at surface
|
2.75 knots - 3.16 mph - 1.41 m/s
|
Max Operating Current
|
1.5 knots
|
Cameras & Lighting
|
Camera Tilt
|
180 degrees - internal chassis rotates
|
Range of View
|
270 degrees - 180 degrees from tilt, 90 degrees from camera lens
|
Camera - Primary
|
570 line Ex-View HAD color - 0.2 Lux
|
Camera - Secondary
|
430 line B/W - 0.03 Lux
|
Focus
|
Manual focus control via hand controller. 90mm to infinity
|
Video Format
|
NTSC or PAL
|
Output
|
Composite
|
Transmission Type
|
Copper
|
Internal Lighting
|
50 Watt Quartz Halogen. Variable intensity via hand controller.
|
Control System
|
Configuration
|
Hand controller, monitor and surface power supply built into protective case
|
Data Channels
|
1 RS-232 for LBV controls
|
Monitor
|
20 cm - 8 in color LCD
|
Sensors
|
Heading, depth, temperature
|
Auto Functions
|
Depth, heading, trim
|
Hand Controller
|
Length
|
195 mm - 7.68 in
|
Width
|
135 mm - 5.3 in
|
Height
|
140 mm - 5.5 in
|
Weight
|
625 grams - 1.38 lbs
|
Joystick
|
Single - forward, reverse, rotate left, rotate right, roll left, roll right
|
Joystick Steps
|
32
|
Vertical Thruster
|
Proportional control knob
|
Additional Controls
|
Membrane keypad - thruster gain control, trim, auto depth, auto heading, camera tilt, camera focus, camera switch, light On/Off, light intensity, accessories, video overlay position, power On/Off, programming keypad
|
Safety
|
I.P. 64 - splash proof
|
Surface Power Supply
|
Length
|
470 mm - 18.5 in
|
Width
|
371 mm - 14.6 in
|
Height
|
196 mm - 7.7 in
|
Weight
|
13 kg - 28.7 lbs
|
Input Voltage
|
100-130 VAC or 200-240 VAC
|
Power Requirement
|
650 Watts maximum
|
Safety
|
Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds "Code of Practice for the Safe Use of Electricity in Water"
|
Water Proofing
|
I.P. 64 - Splash proof
|
Umbilical
|
Diameter
|
7.6 mm - 0.3 in nominal
|
Length
|
100 meters - 500 feet
|
Working Strength
|
45 kgf - 100 lbs
|
Breaking Strength
|
318 kgf - 700 lbs
|
Strength Member
|
Kevlar
|
Buoyancy
|
Neutral in fresh water - slightly positive in Seawater
|
Conductors
|
Twisted pair with shield
|
On-Screen Information Display
|
Information Displayed
|
Thruster gain settings, light level, Trim On/Off, heading, depth, turns counter, camera angle, water temperature, time, date, user text
|
User Text
|
Up to 28 characters
|
Positioning
|
Bottom, top or off
|
Menus
|
Quick menu, setup, calibrate, diagnostics, options
|
Transit Cases
|
Case - 1
|
Length
|
762 mm - 30 in
|
Width
|
516 mm - 20.3 in
|
Height
|
452 mm - 17.8 in
|
Weight
|
27 kg - 60 lbs
|
Contents
|
LBV with options if fitted and spares kit
|
Case - 2
|
Length
|
762 mm - 30 in
|
Width
|
516 mm - 20.3 in
|
Height
|
452 mm - 17.8 in
|
Weight
|
30kg - 66 lbs
|
Contents
|
Umbilical, integrated console, spare thruster, manuals and vacuum pump.
|
Spares, Tools and Manuals
|
Spares Contents
|
Fastener kit, seal kit, propellers, spare Halogen lamp, gel lube, Kluber grease, acrylic polish, fuse
|
Tool Contents
|
1.5, 2, 3, 4, 5 mm hex ball drivers, #1, #2 Phillips screw drivers, 10 mm socket driver, small straight blade screwdriver, 11/16 socket, 19 mm open end, O-ring insertion tool, vacuum pump
|
Spare Thruster
|
Brushed thruster assembly
|
Manuals
|
Operators manual, service and repair CD-ROM
|
|